HERITAGE USER MANUAL
Sun and moon automatic watch
VIDEO TUTORIAL
MANUAL
Turn the crown clockwise about 30 times at Position I to start.
Reminder: Heritage automatic watches are powered by wrist movement; wind manually if not worn for more than 24 hours.
1. Pull the watch crown out to position II.
2. Rotate the crown to set the correct time.
3. Push back the watch crown. The second hand will immediately start moving.
The Sun & moon display operates on a 24-hour cycle and is automatically synchronized with the time setting.
Use a pin to push Pusher A to change the year.
REMINDER:
The year won’t change automatically after changing the month/ date, press pusher A to change the year.
Push Pusher B to change the month.
REMINDER:
The month won’t change automatically after changing the date, press pusher A to change the month.
Before setting the date:
Confirm the time currently displayed on the watch is 12:00PM, ensuring the Sun & Moon phase indicator points to 12.
Push Pusher C to change the date.
Before setting the day of week:
Confirm the time currently displayed on the watch is 12:00PM, ensuring the Sun & Moon phase indicator points to 12.
Use a pin to push Pusher D to change the day of week
REMINDER:
When setting the day of the week, ensure the hand of the day sub-dial points directly to the day. The position between two days does not represent noon.
1. Release spring bars at the back by pushing the pin inward.
2. Replace the strap
3. Place one end of the spring bar into the lug hole, then insert spring bars by pushing the pin inward. Make sure the spring bars snap into the lug holes.
⮕Full tutorial
1. Insert the strap tool into the clasp gap.
2. Gently pull down until the full clasp movement is released.
3. Adjust to suit the size of the wrist, and replace the clasp once comfortable.
⮕Full tutorial
1. Hook the small clasp onto the crossbar
2. Press and close the safety clasp.
Reminder: After wearing, check that the clasp is secure and properly fastened.